HXI has combined it’s high performance WR-12 Balanced Mixer (HBM12) with it’s HAFME X4 multipliers and X6 multipliers to provide more compact up and downconverter assemblies for the 71-76 GHz and 81-86 GHz communications bands and the 76-81 GHz automotive radar band. These integrated modules exhibit the same low conversion loss as the standalone HBM12 mixers and incorporate the same […]
Articles
The HHPAV-548 Power Amplifier covers the frequency range from 57 to 66 GHz. MMIC technology is employed for high reliability and repeatability. The amplifier package provides WR-15 waveguide interfaces in an in-line configuration using the standard UG-385/U flange. The amplifier can be used in transmitters for communication and radar systems and also for amplification in test equipment. […]
Renaissance introduces a range of high power electro-mechanical switches operating at 1800W CW power over the frequency range of DC to 1 GHz. Ideally suited for test & measurement applications. Datasheet
The HSWM22801-309 SPDT Broadband Switch covers a wide range of applications in the 26 to 40 GHz band. The switch uses a low loss microstrip structure and a GaAs MMIC which also offers high RF power handling. Superior performance in a compact size is featured in this design. Applications include transmit/receive switching, receiver protection, integrated subsystems and […]
For X-band radar applications, Renaissance has designed a high power coaxial circulator. Operating in the 9 – 10 GHz frequency range, it offers low VSWR while handling 100W of CW power. 3A8NAH-ROHS Datasheet
HXI’s HLNA Series of Low Noise Amplifiers covers the frequency ranges from 20 to 100+ GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required. MMIC technology is employed for high reliability and repeatability. Low Noise Amplifier Datasheet, Series […]
Renaissance has designed an S-band 3-port circulator in WR284 waveguide. This circulator is best suited for both military and commercial applications (air traffic control, ground base and ship borne radars), and offers the ability to handle high power while maintaining low insertion loss. 3WR284NA-1 Datasheet
Looking for a high power circulator for IFF transponder applications? Renaissance’s 3G2NER operates from 1030 – 1110 MHz and can handle 1000W peak, 400W average with just 0.5 dB insertion loss. 3G2NER Datasheet
Renaissance offer a X-band Iso-Adapter that is designed for High Rel applications requiring waveguide to coaxial transition. Operating between 8.2 to 12.4 GHz, the iso-adapter provides 0.5 dB of loss and 18 dB of reverse isolation. The output is WR90 for the waveguide interface with UG135/U flange. Input is a type N-Female connector. 2A8BAW Datasheet
Renaissance Electronics offers a high power divider that divides power from 6 to 18 dB across the output ports. Operating between 1100 and 1500 MHz, this 8-way divider has a footprint of 8” x 5”. The divider can handle 350W Peak and 35 W CW. 10A3NB-8S Datasheet
Follow Us