Articles

Sep 18, 2013

Renaissance has released a new L-band 4.5 kW peak power drop-in circulator operating from 1 to 1.12 GHz. With insertion loss of less than 0.2 dB and with return loss and isolation over 23 dB, the circulator is ideal to duplex an antenna with HPA and a receiver. This circulator has been customized to withstand 50W […]

Sep 17, 2013

Renaissance has developed a new low cost, high power, drop-in isolator to protect expensive amplifiers from unwanted reflected power levels at S band frequencies. Covering 2.7 – 2.9 GHz, this isolator provides a VSWR of 1.25:1 at input and output ports with loss of 0.4 dB and isolation of 20 dB over -30 to +85 […]

Sep 17, 2013

Renaissance has developed a new drop-in isolator to handle 15 W of reflected power in a compact size of 0.5” x 0.75” at X band frequencies. Covering 7.9 – 8.4 GHz, this isolator provides a VSWR of 1.25:1 at input and output ports with loss of 0.5 dB and isolation of 20 dB over -40 […]

Sep 17, 2013

Renaissance has designed a high Peak and Average Power handling circulator covering 260–300 MHz. With low loss of 0.3 dB and isolation of 20 dB, it is optimized for Aeronautical Communications & Navigation applications 3A2NGB Datasheet

Sep 17, 2013

Renaissance has developed a new X-band Iso-Adapter that is designed for High Rel applications requiring waveguide to coaxial transition. Operating between 8.2 to 12.4 GHz, the iso-adapter provides 0.5 dB of loss and 18 dB of reverse isolation. The output is WR90 for the waveguide interface with UG135/U flange. Input is a type N-Female connector. […]

Sep 11, 2013

Renaissance has designed a 12 x 12 Programmable Delay Line (PDL) Matrix that can be used to simulate targets for Phased Array Radar and Receiver optimization. Each of the 12 inputs is connected to dividers, programmable attenuators and a programmable delay line matrix. The amplitude and phase are controlled by custom software with custom defines UDP protocols. 18A4NAC Datasheet

Sep 11, 2013

Renaissance has released a new S-band 2.5 kW peak power drop-in circulator operating from 2.9 to 3.3 GHz. With insertion loss of less than 0.6 dB and with return loss and isolation over 19 dB, the circulator is ideal to duplex an antenna with HPA and a receiver. This circulator has been customized to withstand 250W […]

Sep 10, 2013

Renaissance has developed a new solid state programmable attenuator that can be used to perform fading simulations. The device operates from DC – 3 GHz with 5.5 dB insertion loss and can attenuate 100 dB in 1 dB steps. The attenuator can handle 20 dBm over -40 to +85 C. 19A3BA Datasheet

Sep 10, 2013

Renaissance Electronics has developed a new low PIM attenuator perfect for ATE applications which covers DC to 3.0 GHz. Available in multiple attenuation values and handling 100W CW, the attenuator exhibits -145dBc of PIM distortion; making it ideal for test applications which require extremely low PIM. 19A3BC-XX Datasheet