Looking for a low power, pick and place compatible surface mount isolator operating at UHF band? Renaissance has designed a 10mm square footprint package operating over 300 – 310 MHz with less than 1dB loss. 3SLE2NAR Datasheet
Articles
For S-band medium power amplifiers Renaissance has designed a compact isolator that operates from 2 to 5 GHz in a single package. The isolator can handle 10W forward and 5W reverse and has a footprint of just 1” x 1”. 2H3BE Datasheet
HXI’s HBUC series broadband balanced upconverters cover a wide range of waveguide bands from 26.5 -110 GHz. They utilize a low loss structure mated to a matched pair of GaAs Schottky beam lead diodes for minimum conversion loss and maximum bandwidth. Superior LO noise suppression and LO -RF isolation values are design features. Upconverters are used to create a millimeter wave signal […]
Looking for a Ka-band isolator for the satellite-on-the move communication systems to enable high-data-rate applications in both the military and commercial sectors? Renaissance’s 2A9BCG-ROHS is the ideal component that has successfully passed all the necessary qualification requirements. 2A9BCG-ROHS Datasheet
HXI’s HBM series of broadband balanced mixers covers the waveguide bands from 26.5– 110 GHz. They utilize a low loss structure mated to a matched pair of GaAs Schottky beam lead diodes for minimum conversion loss and maximum bandwidth. Superior LO noise suppression and LO-RF isolation values are inherent design features. Biased versions are available for use with lower LO drive levels. […]
For test and measurement applications, Renaissance has designed a wide band, dual junction circulator that operates from 8 to 14 GHz in a compact 1.05” x 0.56” x 0.5” size. 3B9BC Datasheet
HXI’s HFD Series of detectors employs zero biased beamlead Schottky-barrier diodes. Full waveguide band operation is achieved with good sensitivity in a compact unit. HFD units are offered between 18 and 170 GHz. The units are fixed tuned and operate without bias, making them particularly convenient to use. Applications are as sensors for network analyzers and as low […]
For SATCOM on-the-Move (SOTM) terminals, Renaissance has designed a compact low loss isolator with K-connectors to support the bandwidth requirement of 30 to 31 GHz. The power handling on this model is 10 W forward and 1 W reverse but this package can be customized for up to 50 W forward and 10 W reverse. 2A9NFE-9-ROHS Datasheet
For radar, satellite and wireless computer applications, Renaissance has designed an X-band, high power surface mount isolator. Operating at a frequency range of 9.5 – 11.5 GHz, this isolator can be used in civilian, military and government applications, with its high reliability and performance levels. 2SMH8NW-ROHS Datasheet
Renaissance’s new C-band coaxial isolators, operating in the 7.1 – 7.9 GHz and 7.7 – 8.6 GHz frequency ranges, is ideal for radar test applications. With 0.4 dB loss and 20 dB isolation, this isolator ensures consistent system fidelity. 2A7NFZ / 2A7NGA Datasheet
Follow Us